1 5

Noco

NOCO Genius 2 6V & 12V 1.1A UltraSafe Smart Battery Charger

NOCO Genius 2 6V & 12V 1.1A UltraSafe Smart Battery Charger

25.000 KWD
33.000 KWD 25.000 KWD
Sale Sold out

<head><meta charset="UTF-8" /></head>

NOCO GENIUS 2 UltraSafe Smart Battery Charger + Mantainer

EVERYTHING CHARGER.

The NOCO GENIUS 2 is perfect for charging motorcycles, cars, boats, trucks, UTVs, lawn mowers and more. Extremely effective for maintaining automotive, marine, RV, powersport, lawn & garden and deep-cycle batteries. Its compact, yet powerful form factor allows it to charge batteries 2X faster than ordinary chargers, and one of the safest, most advanced charger on the market. Plug-in, connect to the battery, select a charge mode, and start charging your battery. A fully-automatic,
worry-free battery charger for year-round use. Rated at 2-amp, is designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, maintenance-free, and lithium-ion batteries.

  • Charge at 2Ah fully drained lead-acid and lithium-ion batteries up to 40 amp-hour with zero overcharge - Stay safely connected 24/7.
  • Maintaine every 6-volt and 12-volt lead-acid and lithium-ion batteries.
  • Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
  • Ultra-compact, portable, energy-efficient design that's impact, UV and water-resistant (IP65).
  • Actively monitors battery for safe and efficient charging. Includes spark-proof technology and reverse polarity protection.
  • Advanced diagnostics automatically tests and detects a bad, damaged, or shorted battery.
  • Restore your battery - Detects sulfation and acid stratification and restores lost performance for stronger engine starts and extended battery life.
  • Charge dead batteries - Charges dead batteries as low as 1-volt. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts.
  • Simple to set up and use - Plug-in, connect to the battery, select a charge mode, and start charging your battery. A fully-automatic, worry-free battery charger for year-round use.
  • Compatible with all types of vehicles - Charge and maintain cars, motorcycles, lawnmowers, ATVs, tractors, trucks, SUVs, boats, classic cars, hot rods, and more - you name it.
RICARICA A PARTIREDA ZERO VOLT

CHARGE DOWN TO ZERO VOLTS

Charge dead batteries as low as 1-volt. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts.

RIPORTA IN VITA LE BATTERIE

BRING BATTERIES BACK TO LIFE

Built-in desulfation mode for the most corroded batteries. Auto detection with smart diagnostic indicators starts a Repair Mode integrated within a 9-step charging profile.

COMPENSAZIONETERMICA

THERMAL COMPENSATION

An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.

RICARICA SENZA PROBLEMI

WORRY-FREE CHARGING

Provides all-season, all-weather charging for a healthy battery. Leave plugged in 24/7 with no worries of overcharging. Automatically returns to its last selected mode.

Maximum Versatility.

Genius clamps are built with needle-nose profiles for smaller terminal applications and detachable integrated eyelets for permanently mounting the accessory to the battery

 

 

(1) Mode Button Push to cycle through charging Modes.
(5) Standby LED Illuminates when the charger is in Standby Mode, the charger is not charging or providing any power to the battery.
(2) Overvoltage Error LED Illuminates solid Red; Battery Voltage is above Protect voltage.
(6) Charge LED indicates the connected battery(s) state-of-charge.
(3) Bad Battery Error LED. Illuminates solid Red when connected battery will not hold a charge.
(7) Mode LED Indicates the Charge Mode the charger is currently in. Push the MODE button to cycle through charge Modes.
(4) Reverse Polarity Error LED Illuminates solid Red when reverse polarity is detected.
(8) LED 6 V Mode button must be pressed and held for 3 seconds to enter the mode.

Charging Modes.

The Genius2 has six (6) modes: Standby, 12V, 12V AGM, 12V LITHIUM, 6V and Force. Some charge modes must be pressed and held for three (3) to five (5) seconds to enter the mode. These “Press and Hold” modes are advanced charging modes that require your full attention before selecting. It is important to understand the differences and purpose of each charge mode. Always check with battery manufacturer to confirm the right charge mode for your specific battery. Do not operate the charger until you confirm the appropriate charge mode for your battery. Below is a brief description:

Mode
Explanation
Standby
In Standby mode, the charger is not charging or providing any power to the battery. Energy Save is activated during this mode, drawing microscopic power from the electrical outlet. Canbus is enabled in Standby mode. When in Standby, the orange Standby LED will illuminate.
No Power
12V
For charging 12-volt Wet Cell, Gel Cell, Enhanced Flooded, Maintenance-Free and Calcium batteries. When selected, the 12V white LED will illuminate.
14.5V | 2A | Up To 40Ah Batteries
12V AGM
For charging 12-volt AGM batteries. When selected, the 12V AGM white LED will illuminate.
14.8V | 2A | Up To 40Ah Batteries
12V LITHIUM
For charging 12-volt lithium-ion batteries, including lithium iron phosphate. When selected, the 12V Lithium blue LED will illuminate. For use on batteries with Battery Management Systems (BMS) only.
14.6V | 2A | Up To 40Ah Batteries
6V
Press & Hold (3 Seconds)
For charging 6-volt Wet Cell, Gel Cell, Enhanced Flooded, Maintenance-Free and Calcium batteries. When selected, the 6V white LED will illuminate.
7.25V | 2A Up To 40Ah Batteries
Force Mode
Press & Hold (5 Seconds)
For charging batteries with a voltage lower than 1V. Press and Hold for five (5) seconds to enter Force Mode. The selected charge mode will then operate under Force Mode for five (5) minutes before returning to standard charging in the selected mode.
2A | Up To 40Ah Batteries

More ways to charge - The possibilities are endless.

Permanently mount eyelet connectors on multiple vehicles to make hard-to-access batteries easy to charge. Charge through the 12V auxiliary or OBDII port from inside a vehicle, or simply extend the reach of your accessories. Whatever the case may be, X Connect creates a solid weatherproof connection that provides maximum current flow and makes interconnecting different applications fast and easy.

NOCO GENIUS 2 Technical Specifications::

  • What's In The Box :
    • GENIUS 2
    • Battery Clamp Connectors w/ Integrated Eyelets.
    • Mounting Bracket w/ Strap
    • (2) Self-Tapping Screws
    • User Guide & Warranty Information.
  • Input Voltage: AC 110-240v - European 2 Pins Plug
  • Battery Voltages: Charges 6 Volt and 12 Volt Lead-Acid and Lithium-Ion Batteries
  • Types of Batteries: Suitable for Wet Cell (Flooded), Gel Cell, Calcium, Lithium, AGM, Enhanced Flooded Battery or any Maintenance-Free Battery
  • Battery Capacity Range: Ideal for Batteries Between 2 to 40 Amp-Hours. Suitable for Maintaining All Battery Sizes.
  • Charging Amperage: 2 Amps
  • Power Consumption: 30 Watts (Max)
  • IP Protection: IP65
  • DC Cable + Clamp Length: 77 Inches (195cm) 18AWG
  • DC Fuse Size: 4 AMP MINI ® Blade Fuse
  • AC Cord:182 cm (71,7 Inches) 18AWG
View full details